1.     Gas level indicators

One of the worst things that can happen to you when you are ready to fire up and yon realized that you the gas bottle is empty. Thankfully, this can be avoided if you get the best propane tank gas level indicator  available.

The gas detection level indicator will actually show you when the gas is low, before you run out! Best of all, it works automatically, while you are cooking.

1.1      Magnetic Gas level indicator

It can be used on all Propane and Butane cylinders so is also handy for your BBQ gas. This gas level Monitor can be placed on to all metallic gas cylinders including Calor Gas.

Easy to follow readings, a simple set up guide and magnetic backing, application could not be easier! Don’t forget to remove it when you change your gas cylinder!

Technical background

When the gas cylinder is under use, the gas that is liquid in the cylinder becomes vaporous. This causes a drop in temperature. The temperature in the upper part of the bottle (where the gas is gaseous) is therefore different from the temperature in the lower part of the bottle (where the gas is still liquid). Exactly these different temperatures can be displayed by the USI-GLM (Gas level Monitor). The vertical bars of the indicator show the temperature difference at the gas cylinder. Which bars light up also depends on the ambient temperature. This indicator works at an ambient temperature (air temperature) of 0°C to 50°C.

Only when the level drops below the level of the upper edge of the USI-GLM will color differences appear in the column.

Features
  • USI-GLM can safely and accurately measure the gas capacity, according to the gas temperature test.
  • Temperature range of -10℃~ 120℃.
  • Will actually show you when the gas bottle is almost empty, before you run out!
  • Works while the gas is beeing used
  • Save money by using more gas from each cylinder
  • Safe & accurate
  • Reusable
  • Compatible with Propane
  • Works on LPG (propane) & butane cylinders
  • Magnetic backing allows for easy reuse on exchange bottles
  • Comes with instruction
Instructions:
  1. Place your Gas Level Monitor (USI-GLM) on a clean area on the lower half of the cylinder.
  2. Turn on the gas and wait 10 minutes before you can read your Indicator. But it’s to keep in mind that the gas level indicator gives you the information of the actual gas level in case it is beeing used.
  3. In the cold season (-15°C to 15°C) the bar on the left will be active, and in the warm season (15°C and more) the bar on the right will be active.
1.2.      Gauge pressure for Gas level Monitor
  • Monitors fuel level without removing the tank. Color coded dial for allowing you to see at a glance when your propane level is low.
  • And it can work with propane tank cylinders, propane regulator with hose and propane adapter
  • It comes with dust cover. No tools required and easy to install with handheel grip for tightening.
  • Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, fire pit table, turkey fryer and more propane appliances.
  • Propane Tank Gauge only, other accessories demo in the picture is not include

2.     Gas detection sensor

The gas detection sensor helps to

  • detect the gas in case of leakage in closed spaces, specially in the kitchen
  • to avoid house fire and early detection of gas since gas cannot be smelled in case of leakage

Translate »